Maintenance Plans
Life is busy enough, and sometimes we forget to take care of the simple things that are so important. At Conn Mechanical Systems, we want to help you get the most out of your heating and cooling equipment so that your systems continue to provide comfort and reliability to you and your family.
If an HVAC system is neglected, it can cost a homeowner more money due to unexpected costly repairs. Regular monitoring of your system will save you money and decrease the chance of a “mid-season” breakdown.
In addition, HVAC service plans give you peace of mind and help maintain the value of your home. Read below and find out which of our plans will work best for your equipment AND your wallet, and then contact us to enroll!
OUR HVAC MAINTENANCE PACKAGES
Oil Heat – Boiler/ Furnace Maintenance Packages
Basic – $160.00*
Inspect chimney base and flue; Check/Clean/Replace if needed oil filter (standard size filter only); Nozzle & Strainer; Clean nozzle assembly; Check thermostat operation; Electrical components; Inspect all exposed copper fittings& joints; Check all controls & safety devices; Test ignition transformer; Adjustment of ignition electrodes; Cleaning of flame sensor; Check low water cut off; Adjustment of burner; Report of system operation & recommendation of repairs, if needed. Includes one (1) hour labor, each additional hour is $95.00.
Plus – $275.00*
Includes items in above Oil Basic Package, plus – Check and set oil pressure; Brushing and vacuuming heat exchanger & breech; One of the following parts at no additional charge: Cad Cell Eye, Relay standard; Oil pump standard (unless there are signs of water damage); Pump coupling; Standard burner motor; Electrodes (if needed); Ignitor, standard (if needed); one bottle of sludge remover/anti-gelling treatment. Includes two (2) hours labor, each additional hour is $95.00. Efficiency testing with digital printout. Priority emergency service included. Package includes reduced after-hour rate of $89.00, 12% discount on all other parts and labor for the current season. If warranty parts are replaced, labor rate will be charged at flat rate pricing.
Other Options
- Basic Oil package with Basic A/C package – $230.00*
- Plus Oil Heat with Plus A/C package – $425.00
Basic Oil-Fired Water Heater – 160.00*
Includes: Clean/Replace Oil Filter, Clean and Replace Nozzle, Check Thermostat Operation
Plus Oil-Fired water Heater – $185.00*
Includes: One of the following parts at no additional cost: Cad Cell Eye, Standard Cad Eye Relay, Oil Pump Standard (unless there are signs of Water Damage), Pump Coupling, Standard Burner Motor, Electrodes, Standard Ignitor, Sludge Remover/Anti-Gel Treatment, Includes 1 Hour Labor, each additional Hour $95.00, Efficiency Testing with Digital Printout, Priority Emergency Service, Reduced after- Hour Service Call Fee of $89.00 (Reg. $189.00), 12% Discount an all-other Parts and Labor, Flat Rate Labor Pricing for Warranty Parts.
Gas Heat- Boiler /Furnace Maintenance Packages
Basic – $89.00*
Check and clean air filter; Check thermostat operation; inspect electrical components; inspect all exposed copper fittings & Joints; Check Condensate pump operation (if applicable); Check all controls and safety devices; Check burners and clean flame sensor; Clean pilot; Check and flush condensate line (if applicable); Check and set gas pressure; Report of system operation & recommendations of repairs if needed. Includes one half (1/2) hour of labor, each additional hour is $95.00.
Plus – $175.00*
Includes items in Gas Basic Package. Plus the following parts at no additional cost; Pilot assembly, Flame sensors, thermocouple; Gas valve (single stage); Efficiency testing with digital printout. Priority emergency service included. Package includes 12% discount on all other parts and labor during the current season. If warranty parts are replaced, labor rate will be charged at flat rate pricing. Package includes reduced after-hour rate of $89.00.
Other Options
- Basic Gas package with Basic A/C package – $160.00*
- Plus Gas package with Plus A/C package – $325.00*
Air Conditioning Maintenance Packages
Basic – $89.00*
Check condensate/ condensate pump operation; Check evaporation coil; inspect pan (if applicable); inspect all exposed copper fittings& joints; measure, record refrigerant levels (refrigerant not included); Check amperage of compressor; check /clean air filter (filter not included); lubricate & check all motors (if applicable); check thermostat operation; inspect electrical components, connections and controls. Report of system operation & recommendations of repairs if needed. Includes one half (1/2) hour labor, each additional hour is $95.00.
Plus – $180.00*
Includes items in Basic A/C package plus the following parts at no additional cost: Contactors, fuses and capacitors. Package includes 12% discount on all other parts and labor during the current season. If warranty parts are replaced, labor rate will be charged at flat rate pricing. Package includes reduced after-hour rate of $89.00.
Other Maintenance Packages
Tankless Hot Water Heater Package – $175.00*
Descale unit; clean strainers, collection box, and trap; Inspect all electrical components. Unit must have service valves or additional charges apply if we install them (ASK TECHNICIAN FOR DETAILS); Recommended once per year. Priority emergency service included. Package includes 12% discount on all other parts and labor during the current season.
Tankless Hot Water Heater package along with any heat or air conditioning package will reduce this price to $150.00*
Tankless Combination Unit Package – $225.00*
Includes items from Tankless hot water heater package, plus: draining of boiler, cleaning water strainer and/or Magnetic filter (if installed), Clean condensate drain, test condensate pump (if installed), clean air intake, clean flame rod assembly. Unit must have service valves for isolating boiler from water heater supply, additional charges will apply if Tech needs to install.
Geothermal/ Heat Pump Plus Package –
One Visit Yearly (either Heating or Cooling Season) – $175.00 *
Two Visits Yearly (1 Visit each for Heating and Cooling seasons) – $300.00 *
Check refrigeration pressures; Check air temperatures; Check operation of reversing valve; Visual inspection of high and low electrical connections; inspect all exposed copper fittings & joints; Check amperage of compressor; check operation of thermostat; check and test backup heat; check water connections; check water flow (open loops that have meters installed); check/flush condensate drain; check condensate pump. Report of system operation & recommendations of repairs if needed. Priority emergency service on covered unit, 12% discount on all future repairs during the current season. 12 months guarantee on any parts we replace.
Plus Mini-Split Maintenance Packages
Includes: Condenser and Evaporator Head (s), Check Condensate Pump, Check Evaporation Coil, Record Refrigerant level, (Refrigerant not included), Clean Air Filter (Filter not included), Check Thermostat Report of system operation and recommendations if need, One of the following parts at no additional cost:
Contactors, Fuses, or Capacitors, Priority Emergency Service, Reduced after- Hour Service Call Fee of $89.00 (Reg. $189.00), 12% Discount an all-other Parts and Labor, Flat Rate Labor Pricing for Warranty Parts
Pricing begins at $180.00 for one condenser and one evaporator head, with an additional $89.00 per extra head.
Plus Mini split with (1) Head $180.00*
Plus Mini split with (2) Heads $269.00*
Plus Mini split with (3) Heads $358.00*
Plus Mini split with (4) Heads $447.00*
Plus Mini split with (5) Heads $536.00*
Plus Mini split with (6) Heads $625.00*
Plus Mini split with (7) Heads $714.00*
Plus Mini split with (8) Heads $803.00*